Scientific Waterbath

Bulletin WB - 921


Rectangular Water Bath

Single walled made of stainless steel with concentric rings and a lid are provided on hole. The bath has a built-in constant level arrangement.
Suitable for use on 230 Volts AC single phase supply

Model Holes Inner Dimensions Rating
SE 138 6 Holes of 7.5 cm 35 x 25 x 10 cms 1 KW
SE 139 12 holes of 7.5 cm 40 x 30 x 10 cms 1 KW

Cylindrical Water Bath

Made of stainless steel with built in constant level arrangement, concentric rings and stainless steel lid Suitable for use on 230 Volts AC single phase supply.

Model Diameter x Height Rating
SE 25 cm x 15 cm 1 KW
SE 32.5 cm x 15 cm 1 KW

Serological Water Bath

This is a double walled serological bath with outer and inner wall made of stainless steel. The gap between the walls is filled with glasswool to minimize loss of temperature. A thermostat, at any point from 50C, controls the temperature automatically
above room temperature to 600C with an accuracy of + 0.50C and operates on single phase AC current. A built-in pilot lamp is also provided indicate the working of thermostat.
Kahn racks to hold 40 tubes, are available at extra cost. The racks are made of stainless steel or brass.

Available in two sizes

Working Space
25 x 12.5 x 12.5
37.5 x 25 x 12.5

Thermostatic Water Bath

Double walled construction, inner and outer chamber made of stainless steel with concentric rings and lids, with thermostatic control.
Temperature range: 50C above ambient to 950C
Accuracy: + 20C
The bath can be raised to boiling temperature with thermostat set at maximum.

Universal Water Bath

Construction :

This water bath made from single wall made of stainless steel. It is designed to meet almost all requirements of Pathological, Microbiological, Chemical, Physical and other Laboratories.

Temperature Control :

A thermostat controls temperature at any point from 50C above ambient 950C. The accuracy of control is + 10C upto a temperature of 600C and + 20C at a higher temperature and is provided with a pilot lamp. The heating element and the thermostat stem are protected by a perforated false bottom.

Available in two Sizes :

30.0 x 22.5 x 17.5 cm
45.0 x 30.0 x 17.5 cm

Accessories at extra cost:

(a) Pyramidal Limited
(b) Drop-on-Lid
1. 4 holes of 7.5 cm
2. One hole of 12.5 cm (Central)
3. Double of the above Racks (S.S. Plated)
    • Kahn Racks - 40 tubes
    • Wassermann Racks - 48 tubes
    • Agglutination Rack - 42 tubes

Send Enquiry

Designed & Hosted by : MID Promoted by : GID